Chapter 2 Sewing flow
[ADJUST]
Display of center and corner knives correction value
Program No. display window !0
Program No.
Contents display window !1
Correction value
*
When the cycle program is selected, the progress is changed within the cycle program.
[CYCLE]
Display of the cycle program
Program No. display window !0
Program No.
Contents display window !1
Contents of the cycle program
The program No. for the current progress blinks.
30
Start of sewing center knife correction
End of sewing center knife correction
Start of sewing corner knife correction
End of sewing corner knife correction
The cycle program is not used.
Stacker used
Program No. change *
Setting for the center and corner knives
Setting for the center and corner knives
BAS-6150
∆∇ u
Li, Mo
∆∇ u
Program No. change
Li, Mo