9.8.1.2
Starting a Learn Cycle Manually
9.9
Monitoring Rebuilds and Other Processes
9-26
To start the learn cycle properties manually, perform the following steps:
1. Click the Physical tab to open the physical view.
2. Select the BBU icon in the left panel.
3. Click the Operations tab.
The BBU operations appear, as shown in
4. Click Start Learn Cycle and click Go.
Another method to use the BBU operations is to right-click the BBU icon
to open the operations menu and select Start Learn Cycle.
MegaRAID Storage Manager software allows you to monitor the progress
of rebuilds and other lengthy processes in the Group Show Progress
window. Open this window, shown in
Operations->Show Progress on the menu bar.
Figure 9.16 Group Show Progress Window
Monitoring System Events and Storage Devices
Figure
9.15.
Figure
9.16, by selecting Group