5.11.15 Download Firmware to the Physical Devices
Table 5.59
Download Firmware to the Physical Devices
Convention
MegaCli –PdFwDownload – -PhysDrv[E0:S0,E1:S1....] –-f <filename> –aN|
-a0,1,2|-aAll
Description
Flashes the firmware with the file specified at the command line. Firmware files used
to flash the physical drive can be of any format. The CLI utility assumes that you
provide a valid firmware image and flashes the same. The physical device has to do
error checking. Firmware files in .dlp format can be flashed with the DOS version of
the command tool only.
5.12 Enclosure-Related Options
Table 5.60
Display Enclosure Information
Convention
MegaCli –EncInfo -aN|-a0,1,2|-aALL
Description
Displays information about the enclosure for the selected controller(s).
5.13 Flashing the Firmware
5.13.1
Flash the Firmware with the ROM File
Table 5.61
Flash Firmware with ROM File
Convention
MegaCli –AdpFwFlash –f filename [-NoSigChk] [-NoVerChk]-aN|
-a0,1,2|-aALL
Use the command in
devices connected to the selected controller(s).
The commands in this section are used for enclosures.
Use the command in
selected controller(s).
The options in this section describe the functionality of the existing flash
application. The firmware flash options do not require input from the user.
Use the command in
specified at the command line for the selected controller(s).
Enclosure-Related Options
Table 5.58
to download firmware to the physical
Table 5.60
to display enclosure information for
Table 5.61
to flash the firmware with the ROM file
d.
5-35