Table 5.8
Display Specified Controller Properties
Convention
MegaCli –AdpGetProp CacheFlushInterval | RebuildRate | PatrolReadRate|
BgiRate | CCRate | ReconRate | SpinupDriveCount | SpinupDelay |
CoercionMode | PredFailPollInterval | ClusterEnable | BatWarnDsbl |
EccBucketSize | EccBucketLeakRate | EccBucketCount | AlarmDsply |
AbortCCOnError |
LoadBalanceMode | SMARTCpyBkEnbl | SSDSMARTCpyBkEnbl |
MaintainPdFailHistoryEnbl | EnblSpinDownUnConfigDrvs |
EnblSSDPatrolRead |
AutoEnhancedImportDsply | PrCorrectUncfgdAreas -aN|
-a0,1,2|-aALL
Description
Displays the properties on the selected controller(s).
EccBucketCount: Count of single-bit ECC errors currently in the bucket.
See
5.4.7
Set Factory Defaults
Table 5.9
Set Factory Defaults
Convention
MegaCli -AdpFacDefSet -aN|-a0,1,2|-aALL
Description
Sets the factory defaults on the selected controller(s).
5.4.8
Set SAS Address
Table 5.10
Set SAS Address on Controller
Convention
MegaCli –AdpSetSASA str[0-64] -aN
Description
Sets the controllers SAS address. This string must be a 64-digit hexadecimal
number.
5.4.9
Set Time and Date on Controller
5-10
AutoDetectBackPlaneDsbl | CopyBackDsbl |
Table 5.7
for explanations of the other options.
Use the command in
controller(s).
Use the command in
controller(s).
Use the command in
controller(s).
MegaRAID Command Tool
NCQDsply | UseFDEOnlyEncrypt | WBSupport |
Table 5.9
to set the factory defaults on the selected
Table 5.10
to set the SAS address on the selected
Table 5.11
to set the time and date on the selected