Menu Bar - Lenovo ThinkServer RD240 Software User's Manual

7.2.4

Menu Bar

7.2.4.1 File Menu
7.2.4.2 Operations Menu
7.2.4.3 Group Operations Menu
7-8
Here are brief descriptions of the main selections on the MegaRAID
Storage Manager menu bar. Specific menu options are described in
more detail in Chapters 8, 9, and
The File menu has an Exit option for exiting from the MegaRAID Storage
Manager software. It also has a Rescan option for updating the display
in the MegaRAID Storage Manager window. (Rescan is seldom required;
the display normally updates automatically.)
The Operations menu is available when a controller, drive, virtual drive,
or battery backup unit is selected in the MegaRAID Storage Manager
window. The Operations menu options vary depending on the type of
device selected in the left panel of the MegaRAID Storage Manager
window. For example, the Scan for Foreign Config option is available only
when a controller is selected. The options also vary depending on the
current state of the selected device. For example, if you select an offline
drive, the Make Drive Online option appears in the Operations menu.
You can view the Operations selections on the main window on the
Operations tab in the right panel. If an operation requires user inputs
before it can be executed, it appears in the Operations tab but not in the
Operations menu. A device-specific Operations menu pops up if you
right-click a device icon in the left panel.
Configuration options are also available. This is where you access the
Configuration Wizard and other configuration-related commands.
To access the other configuration commands, select the controller in the
left panel, and then select Operations-> Configuration.
The Group Operations menu options include Check Consistency, Show
Progress, and Initialize.
MegaRAID Storage Manager Window and Menus
10 of this manual.