Table 5.47
Set Drive State to Offline
Convention
MegaCli –PDOffline -PhysDrv[E0:S0,E1:S1....] -aN|-a0,1,2|-aALL
Description
Changes the drive state to Offline.
5.11.4
Change the Drive State to Unconfigured Good
Table 5.48
Change Drive State to Unconfigured Good
Convention
MegaCli –PDMakeGood -PhysDrv[E0:S0,E1:S1....] | [-Force] -aN|-a0,1,2|-
aALL
Description
Changes the drive state to Unconfigured Good.
Force: Force the drive to the Unconfigured Good state.
5.11.5
Change Drive State
Table 5.49
Change Drive State
Convention
MegaCli –PDHSP {–Set [{-Dedicated -ArrayN |-Array0,1...}] [-
EnclAffinity] [-nonRevertible] } | -Rmv -PhysDrv[E0:S0,E1:S1,...]
-aN|-a0,1,2|-aALL
Description
Changes the drive state (as it relates to hot spares) and associates the drive to an
enclosure and virtual drive on a single controller, multiple controllers, or all
controllers:
-Set: Changes the drive state to dedicated hot spare for the enclosure.
-Rmv: Changes the drive state to ready (removes the hot spare).
-EnclAffinity: Associates the hot spare to a selected enclosure.
-Array0: Dedicates the hot spare to a specific virtual drive.
Use the command in
Unconfigured-Bad to Unconfigured-Good.
Use the command in
to hot spares, and to associate the drive to an enclosure and virtual drive
for the selected controller(s)
Drive-Related Options
Table 5.48
to change the state of a drive from
Table 5.49
to change the drive state, as it relates
.
5-31