8.6
Changing Virtual Drive Properties
Figure 8.30 Set Virtual Drive Properties
8-40
You can change a virtual drive's Read Policy, Write Policy, and other
properties at any time after the virtual drive is created. To do this, follow
these steps:
1. Click the Logical view tab in the left panel of the MegaRAID Storage
Manager window.
2. Select a virtual drive icon in the left panel of the MegaRAID Storage
Manager window.
3. In the right panel, select the Operations tab, and then select Set
Virtual Drive Properties.
A list of Virtual Drive Properties appears in the right panel, as shown
in
Figure
8.30.
Configuration