Megaraid Storage Manager Support And Installation On Vmware; Installing Megaraid Storage Manager For Vmware Classic - Lenovo ThinkServer RD240 Software User's Manual

6.4 MegaRAID Storage Manager Support and Installation on
VMWare
6.4.1

Installing MegaRAID Storage Manager for VMWare Classic

6-10
This message indicates that the user has installed more than one
copy of MegaRAID Storage Manager software. (This can be done by
using the rpm-force command to install the rpm file directly, which
is not recommended, instead of using the install.sh file.) In such
cases, the user must uninstall all of the rpm files manually before
installing MegaRAID Storage Manager software with the procedure
listed previously.
•
The version is already installed.
This message indicates that the version of MegaRAID Storage
Manager software you are trying to install is already installed on the
system.
•
The installed version is newer.
This message indicates that a version of MegaRAID Storage
Manager software is already installed on the system, and it is a
newer version than the version you are trying to install.
•
Exiting installation.
This is the message that appears when the installation is complete.
•
RPM installation failed.
This message indicates that the installation failed for some reason.
Additional message text explains the cause of the failure.
This section documents the installation of MegaRAID Storage Manager
on VMWare Classic (with console operating system) and on the VMWare
ESX 3i operating system.
VMWare does not support any graphics components. In order to install
MSM on the VMWare operating system, execute the script
./vmware_install.sh from the installation disk.
The installer lets you accept the License agreement, operating system,
and storelib as follows:
MegaRAID Storage Manager Overview and Installation