Lenovo ThinkServer RD240 Software User's Manual page 317

Figure 9.11 Patrol Read Configuration
1. Click a controller icon in the left panel of the MegaRAID Storage
Manager window.
2. Select Operations->Start Patrol Read.
To change the patrol read settings, follow these steps:
3. Click the Logical tab.
4. Click a controller icon in the left panel of the MegaRAID Storage
Manager window.
5. Select the Operations tab in the right panel, and select Set Patrol
Read Properties, as shown in
6. Select an Operation Mode for a patrol read. The options are:
Running a Patrol Read
Figure 9.11.
9-17