4.5.2
Changing the Security Key Identifier, Security Key, and Pass
Phrase
4-64
Figure 4.37 Confirm Enable Drive Security Screen
11. Click Yes on the Confirm Enable Drive Security screen to confirm
that you want to enable the drive security settings.
WebBIOS enables the security key ID, security key, and pass phrase
(if applicable) that you entered and returns you to the main menu.
Attention:
If you forget the security key, you will lose access to
your data. Be sure to record your security key information.
You might need to enter the security key to perform certain
operations.
If you selected disk-based encryption when you made the RAID
configuration, the drive security will be enabled. Perform the following
steps to change the encryption settings for the security key identifier,
security key, and pass phrase.
1. Click Encryption Settings on the main WebBIOS screen.
The Encryption Settings screen appears as shown in
WebBIOS Configuration Utility
Figure
4.38.