Adding Email Addresses Of Recipients Of Alert Notifications - Lenovo ThinkServer RD240 Software User's Manual

9.2.8

Adding Email Addresses of Recipients of Alert Notifications

Note: If you choose to load a backup configuration and the
Configure Alerts dialog currently contains changes that
have not yet been sent to the monitor, the changes will be
lost. You are prompted to confirm your choice.
1. On the Alerts Notification Configuration screen, click the Alert
Setting tab, Mail Server tab, or Email tab.
2. Click Load Backup.
You are prompted to confirm your choice. Then the drive directory
appears from which you can select a backup configuration to load.
3. Select the backup configuration file (it should be in .xml format).
4. Click Open.
The drive directory disappears.
5. Click OK.
The backup configuration is saved and the Alerts Notification
Configuration screen closes.
The Email tab portion of the Alerts Notification Configuration screen
shows the email addresses of recipients of the alert notifications.
MegaRAID Storage Manager sends alert notifications to those email
addresses. Use the screen to add or remove email addresses of
recipients, and to send test messages to recipients that you add.
To add email addresses of recipients of the alert notifications, perform
the following steps:
1. Click the E-mail tab on the Event Notification Configuration screen.
The E-mail section of the screen appears, as shown in
Configuring Alert Notifications
Figure 9.8.
9-11