Table 4.2
Controller Properties Menu Options
Option
Battery Backup
Set Factory Defaults
Cluster Mode
4-76
Figure 4.49 Third Controller Properties Screen
Table 4.2
describes the entries/options listed on the second and third
Controller Properties screen. It is recommended that you leave these
options at their default settings to achieve the best performance, unless
you have a specific reason for changing them.
Description
This entry indicates whether the selected controller has a BBU. If present,
you can click Present to view information about the BBU. For more
information, see
Information."
Use this option to load the default MegaRAID
The default is No.
Use this option to enable or disable Cluster mode. The default is Disabled.
A cluster is a grouping of independent servers that can access the same
data storage and provide services to a common set of clients. When Cluster
mode is disabled, the system operates in Standard mode.
WebBIOS Configuration Utility
Section 4.6.4, "Viewing and Changing Battery Backup Unit
®
WebBIOS CU settings.