Lenovo ThinkServer RD240 Software User's Manual page 232

6-24
1. Install the SAS Provider using the Red Hat Package Manager (RPM)
by entering the following command:
rpm -ivh
The RPM installs all of the neccessary files and the Managed Object
Format (MOF), and it registers the libraries. The Provider is now
ready to use.
Note: After you install ThinkServer CIM SAS Provider, the MOF file
ThinkServer_SASRaid.mof is available under the
/etc/thinkserver_cimprov/sas/pegasus/common directory.
Perform the following step to un- install a CIM SAS Storage Provider on
a Linux system.
1. Remove ThinkServer CIM SAS Provider by entering the command:
This removes all of the necessary files, uninstalls the MOF, and
unregisters the libraries. The SAS Provider is no longer on the
system.
Note: tog-pegasus binaries, such as cimmof, cimprovider, and
wbemexec, should be in PATH variable of /etc/profile,
and hence, should be defined in all environments of the
system.
For Pegasus version 2.5.x, perform the following steps:
1. After you install the ThinkServer SAS Pegasus provider, verify that
libThinkServerSASProvider.so
are in
/usr/lib/Pegasus/providers directory.
If these files are not present, copy libThinkServerSASProvider.so.1
from /opt/tog-pegasus/providers/lib to
/usr/lib/Pegasus/providers and create a symbolic link
libThinkServerSASProvider.so to
/usr/lib/Pegasus/providers/libThinkServerSASProvider.so.1 at
/usr/bin/Pegasus/providers.
2. Restart Pegasus CIM Server and ThinkServerServer by performing the
following steps:
MegaRAID Storage Manager Overview and Installation
and
libThinkServerSASProvider.so.1