•
Start or stop a rebuild, consistency check (CC), or initialization
operation
•
Enable or disable a background initialization (BGI)
•
Stop or display an ongoing background initialization
•
Start or display a reconstruction
•
Start or stop patrol read
•
Set and retrieve patol read related settings
•
Flash new firmware on the SAS RAID controller
•
Read and program NVRAM and flash memory directly into DOS
•
Display relevant messages on the console and/or in the log file
•
Display controller data using one command
•
Exit with predefined success or failure exit codes
•
Scan, preview, and import foreign configurations
•
Set predefined environment variables, such as the number of
controllers and virtual drives
•
Display firmware event logs
•
Display help for how to use the command line options:
•
Display battery unit properties
•
Display enclosure properties
•
Display and set connector mode on supported controllers
The following sections describe the command line options in the
MegaCLI Configuration Utility that you can use to perform these
functions.
Note :
The MegaCLI Configuration Utility has support for the Intel
Itanium (64-bit) platform. MegaCLI is the only application
currently supported on IPF system.
Product Overview
®
5-3