Raid 0 Configuration Preview - Lenovo ThinkServer RD240 Software User's Manual

4.4.3.2 Using Manual Configuration: RAID 1
4-14
Figure 4.6

RAID 0 Configuration Preview

8. Check the information in the configuration preview.
9. If the virtual drive configuration is acceptable, click Accept to save
the configuration. Otherwise, click Back to return to the previous
screens and change the configuration.
10. If you accept the configuration, click Yes at the prompt to save the
configuration.
The WebBIOS main menu appears.
In RAID 1, the RAID controller duplicates all data from one drive to a
second drive. RAID 1 provides complete data redundancy, but at the cost
of doubling the required data storage capacity. It is appropriate for small
databases or any other environment that requires fault tolerance but
small capacity.
WebBIOS Configuration Utility