Removing An Ssd Expansion Card; Installing A Solid State Drive - Lenovo BladeCenter HX5 Installation And User Manual

Expansion
card
standoff

Removing an SSD expansion card

Use this information to remove an SSD expansion card.
To remove an SSD expansion card, complete the following steps:
Step 1. Before you begin, read "Safety" on page iii and "Installation guidelines" on page 23.
Step 2. Locate the blue expansion card lever on the SSD expansion card and lift the lever to release the
SSD expansion card from the blade expansion connector on the system board.
Step 3. Rotate the SSD expansion card up and lift it away from the expansion-card standoffs.
Expansion
card
standoff

Installing a solid state drive

Use this information to install a solid state drive.
You can install up to two solid state drives in the SSD expansion card. The blade server supports using RAID
0 or RAID 1 when two storage drives are installed. See "Using the LSI Logic Configuration Utility program" on
page 83 for information about RAID configuration.
38
BladeCenter HX5 Blade ServerInstallation and User's Guide
Expansion
card
standoff
Expansion
card
Expansion
card
standoff
Expansion
card
Release
handle