HP 445860-B21 - 10Gb Ethernet BL-c Switch Command Reference Manual page 189

Table 161 ACL Configuration Menu options
Command
egrport <port number>
action permit|deny|setprio <0-7>
stats e|d
reset
cur
Description
Configures the ACL to function on egress packets. The egress port
ACL will not match a Layer 2 broadcast or multicast packet. The
egress port ACL will not match packets if the destination port is a
trunk.
Configures a filter action for packets that match the ACL definitions.
You can choose to permit (pass) or deny (drop) packets, or set the
802.1p priority for the packets.
Enables or disables the statistics collection for the Access Control List.
Resets the ACL parameters to their default values and removes the
ACL from all ports to which it is assigned.
Displays the current ACL parameters.
Configuration Menu
189