Access Control Configuration; Access Control List Configuration - HP 445860-B21 - 10Gb Ethernet BL-c Switch Command Reference Manual

Access Control configuration

Command: /cfg/acl
[ACL Menu]
Use this menu to create Access Control Lists (ACLs) and ACL Groups. ACLs define matching criteria used
for IP filtering and Quality of Service functions.
The following table describes the Access Control Configuration Menu options.
Access Control Configuration Menu options
Table 160
Command
acl <1-384>
group <1-384>
cur

Access Control List configuration

Command: /cfg/acl/acl <1-384>
[ACL 1 Menu]
These menus allow you to define filtering criteria for each Access Control List (ACL). The following table
describes the ACL Configuration Menu options.
Table 161 ACL Configuration Menu options
Command
ethernet
ipv4
tcpudp
meter
re-mark
pktfmt
acl - Access Control List Item Config Menu
group - Access Control List Group Config Menu
cur - Display current ACL configuration
Description
Displays Access Control List (ACL) configuration menu.
Displays ACL Group configuration menu.
Displays the current Access Control parameters.
ethernet - Ethernet Header Options Menu
ipv4 - IP Header Options Menu
tcpudp - TCP/UDP Header Options Menu
meter - ACL Metering Configuration Menu
re-mark - ACL Re-mark Configuration Menu
pktfmt - Set to filter specific packet format types
egrport - Set to filter for packets egressing this port
action - Set filter action
stats - Enable/disable statistics for this acl
reset - Reset filtering parameters
cur - Display current filter configuration
Description
Displays the ACL Ethernet configuration menu.
Displays the ACL IP version 4 configuration menu.
Displays the ACL TCP/UDP configuration menu.
Displays the ACL meter configuration menu.
Displays the ACL re-mark configuration menu.
Displays the ACL Packet Format configuration menu.
Configuration Menu
188