HP 445860-B21 - 10Gb Ethernet BL-c Switch Command Reference Manual page 115

The following table describes the Syslog Configuration Menu options.
Syslog Configuration Menu options
Table 79
Command
host <IP address>
host2 <IP address>
sever <1-7>
sever2 <1-7>
facil <1-7>
facil2 <1-7>
console disable|enable
log <feature|all>
<enable|disable>
cur
Description
Sets the IP address of the first syslog host. For example, 100.10.1.1.
Sets the IP address of the second syslog host. For example, 100.10.1.2.
Sets the severity level of the first syslog host displayed. The default is 7, which
means log all the severity levels.
Sets the severity level of the second syslog host displayed. The default is 7,
which means log all the severity levels.
This option sets the facility level of the first syslog host displayed. The range is
0-7. The default is 0.
This option sets the facility level of the second syslog host displayed. The range
is 0-7. The default is 0.
Enables or disables delivering syslog messages to the console. When
necessary, disabling console ensures the switch is not affected by syslog
messages. It is enabled by default.
Displays a list of features for which syslog messages can be generated. You
can choose to enable/disable specific features or enable/disable syslog on all
available features.
Features include:
console
system
mgmt
cli
stg
vlan
ssh
vrrp
ntp
ip
web
ospf
rmon
ufd
802.1x
cfg
Displays the current syslog settings.
Configuration Menu
115