Domain Name System Configuration - HP 445860-B21 - 10Gb Ethernet BL-c Switch Command Reference Manual

Domain Name System configuration

Command: /cfg/l3/dns
[Domain Name System Menu]
The Domain Name System (DNS) Configuration Menu is used for defining the primary and secondary
DNS servers on your local network, and for setting the default domain name served by the switch
services. DNS parameters must be configured prior to using hostname parameters with the ping,
traceroute, and tftp commands.
The following table describes the Domain Name System (DNS) Configuration Menu options.
Table 149 Domain Name System (DNS) Configuration Menu options
Command
prima <IP address>
secon <IP address>
dname <dotted DNS notation>|none
cur
prima - Set IP address of primary DNS server
secon - Set IP address of secondary DNS server
dname - Set default domain name
cur - Display current DNS configuration
Description
Sets the IP address for your primary DNS server. Use dotted decimal
notation. For example, 192.4.17.41.
Sets the IP address for your secondary DNS server. If the primary
DNS server fails, the configured secondary will be used instead.
Enter the IP address using dotted decimal notation. For example,
192.4.17.42.
Sets the default domain name used by the switch. For example:
mycompany.com.
Displays the current Domain Name System (DNS) settings.
Configuration Menu
178