HP 445860-B21 - 10Gb Ethernet BL-c Switch Command Reference Manual page 85

Hp 10gb ethernet bl-c switch command reference guide
Hide thumbs Also See for 445860-B21 - 10Gb Ethernet BL-c Switch:
Table of Contents

Advertisement

Table 52
RMON statistics
Statistics
etherStatsOctets
etherStatsPkts
etherStatsBroadcastPkts
etherStatsMulticastPkts
etherStatsCRCAlignErrors
etherStatsUndersizePkts
etherStatsOversizePkts
etherStatsFragments
etherStatsJabbers
etherStatsCollisions
etherStatsPkts64Octets
etherStatsPkts65to127Octets
etherStatsPkts128to255Octets
Description
The total number of octets of data (including those in bad packets)
received on the network (excluding framing bits but including
FCS octets).
The total number of packets (including bad packets, broadcast packets,
and multicast packets) received.
The total number of good packets received that were directed to the
broadcast address.
The total number of good packets received that were directed to a
multicast address.
The total number of packets received that had a length (excluding
framing bits, but including FCS octets) of between 64 and 1518 octets,
inclusive, but had either a bad Frame Check Sequence (FCS) with an
integral number of octets (FCS Error) or a bad FCS with a non-integral
number of octets (Alignment Error).
The total number of packets received that were less than 64 octets long
(excluding framing bits but including FCS octets) and were otherwise
well formed.
The total number of packets received that were longer than 1518 octets
(excluding framing bits but including FCS octets) and were otherwise
well formed.
The total number of packets received that were less than 64 octets in
length (excluding framing bits but including FCS octets) and had either a
bad Frame Check Sequence (FCS) with an integral number of octets
(FCS Error) or a bad FCS with a non-integral number of octets
(Alignment Error).
The total number of packets received that were longer than 1518 octets
(excluding framing bits, but including FCS octets), and had either a bad
Frame Check Sequence (FCS) with an integral number of octets (FCS
Error) or a bad FCS with a non-integral number of octets (Alignment
Error). Jabber is defined as the condition where any packet exceeds 20
ms. The allowed range to detect jabber is between 20 ms and 150 ms.
The best estimate of the total number of collisions on this Ethernet
segment.
The total number of packets (including bad packets) received that were
less than or equal to 64 octets in length (excluding framing bits but
including FCS octets).
The total number of packets (including bad packets) received that were
greater than 64 octets in length (excluding framing bits but including
FCS octets).
The total number of packets (including bad packets) received that were
greater than 127 octets in length (excluding framing bits but including
FCS octets).
Statistics Menu
85

Advertisement

Table of Contents
loading

Table of Contents