Layer 3 Information - HP 445860-B21 - 10Gb Ethernet BL-c Switch Command Reference Manual

Layer 3 information

Command: /info/l3
[Layer 3 Menu]
The following table describes the Layer 3 Information Menu options.
Table 26 Layer 3 Information Menu options
Command
route
arp
ospf
rip
ip
igmp
vrrp
dump
route - IP Routing Information Menu
arp - ARP Information Menu
ospf - OSPF Routing Information Menu
rip - RIP Routing Information Menu
ip - Show IP information
igmp - Show IGMP Snooping Multicast Group information
vrrp - Show Virtual Router Redundancy Protocol information
dump - Dump all layer 3 information
Usage
Displays the IP Routing Menu. Using the options of this menu, the system displays the following
for each configured or learned route:
Route destination IP address, subnet mask, and gateway address
Type of route
Tag indicating origin of route
Metric for RIP tagged routes, specifying the number of hops to the destination (1-15 hops,
or 16 for infinite hops)
The IP interface that the route uses
Displays the Address Resolution Protocol (ARP) Information Menu.
Displays OSPF routing Information Menu.
Displays Routing Information Protocol Menu.
Displays IP Information. IP information, includes:
IP interface information: Interface number, IP address, subnet mask, VLAN number, and
operational status.
Default gateway information: Metric for selecting which configured gateway to use,
gateway number, IP address, and health status
IP forwarding information: Enable status, lnet and lmask
Port status
Displays IGMP Information Menu.
Displays the VRRP Information Menu.
Dumps all switch information available from the Layer 3 Menu (10K or more, depending on
your configuration).
If you want to capture dump data to a file, set your communication software on your
workstation to capture session data prior to issuing the dump commands.
Information Menu
53