Table 18
Layer 2 Information Menu options
Command
vlan
gen
dump
FDB information menu
Command: /info/l2/fdb
[Forwarding Database Menu]
The forwarding database (FDB) contains information that maps the media access control (MAC) address
of each known device to the switch port where the device address was learned. The FDB also shows
which other ports have seen frames destined for a particular MAC address.
NOTE:
The master forwarding database supports up to 8K MAC address entries on the
management processor (MP) per switch.
Usage
Displays VLAN configuration information, including:
VLAN Number
VLAN Name
Status
Port membership of the VLAN
Displays general Layer 2 configuration information.
Dumps all switch information available from the Layer 2 menu (10K or more, depending on
your configuration).
If you want to capture dump data to a file, set your communication software on your
workstation to capture session data prior to issuing the dump commands.
find
- Show a single FDB entry by MAC address
port
- Show FDB entries on a single port
vlan
- Show FDB entries on a single VLAN
state
- Show FDB entries by state
dump
- Show all FDB entries
Information Menu
39