Table of Contents
Advertisement
S3600 Series 8- or 16-Port 10G/Multi-Gigabit Ethernet Smart Switch with 2 SFP+ Ports
Remove the access profile
You can remove an access profile that you no longer need. Before you can remove the
access profile, you must deactivate it (see Deactivate the access profile on page 405).
To remove an access profile:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network,
or connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser and enter the IP address of the switch in the address field of
your web browser.
If you do not know the IP address of the switch, see Access the switch on-network
and connected to the Internet on page 25 or Access the switch off-network and not
connected to the Internet on page 32.
The Device Admin Password page displays.
If you did not yet activate your warranty, the Register to activate your warranty page
displays. For more information, see Register the switch on page 35.
3. Enter one of the following passwords:
• Enter your device admin password.
• If you previously managed the switch through the Insight Cloud Portal or Insight
app, enter the Insight network password for the last Insight network location.
For information about the credentials, see Credentials for the device UI on page 34.
4. Click the Login button.
The Dashboard page displays.
5. Select Security > Protocol Access Control.
The Protocol Access Control page displays.
6. Click the Remove Profile button.
A confirmation pop-up window displays.
7. Click the Yes, Remove button.
The access profile is removed.
Port authentication
With port-based authentication, when 802.1X is enabled both globally and on the port,
successful authentication of any one client device (supplicant) attached to the port
results in all users being able to use the port without restrictions. At any time, only one
Manage Switch Security
407
User Manual
Advertisement
Table of Contents
Troubleshooting
