Ram Error - Xerox Phaser 6280 Service Manual

RAM Error

Phaser 6280 Color Laser Printer Service Manual
The printer controller has detected RAM error.
Applicable Chain Link
Chain Link
Chain Link
Initial Actions
Cycle printer power.
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Image Processor Board, PL9.1.27
Memory Card (Option), PL9.1.30
Troubleshooting Procedure Table
Step Actions and Questions
1 1. Verify RAM is compatible with the
printer. If RAM was recently
installed, it may not be compatible.
2. Is RAM compatible?
1. Check the Memory Card for correct
2
installation.
2. Is the Memory Card correctly
installed?
3 1. Replace the Memory Card
(page 8-91).
2. Does the error still occur?
116-316: ESS DIM Slot RAM W/R Check Fail
116-320: ESS DIMM Slot RAM Error
Wiring and Plug/Jack Map References
Error Messages and Codes
Yes No
Go to step 2. Replace the
Memory Card
(page 8-91).
Go to step 3. Complete.
Replace the Complete.
Image
Processor Board
(page 8-87).
3-147