Ram Error - Xerox Phaser 6180 Service Manual

RAM Error

Phaser 6180 Color Laser Printer Service Manual
The printer controller has detected RAM error.
Applicable Chain Link
■ Chain Link
■
Chain Link
Initial Actions
■ Cycle printer power.
■
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Image Processor Board, PL9.1.27
■
Memory Card (Option), PL9.1.30
■
Troubleshooting Procedure Table
Step Actions and Questions
1 Verify RAM is compatible with the
printer. If RAM was recently installed,
it may not be compatible. Is RAM
compatible?
2 Check the Memory Card for correct
installation. Is the Memory Card
correctly installed?
3 Replace the Memory Card. Does the
error still occur?
116-316: RAM Error (DIM Slot RAM W/R Check Fail)
116-320: RAM Error (DIMM Slot RAM Error)
Wiring and Plug/Jack Map References
Error Messages and Codes
Yes No
Go to step 2. Replace the
Memory Card.
Go to step 3. Complete.
Replace the Complete.
Image
Processor Board
(page 8-89).
3-103