Receiving An Ip Address Automatically (Dhcp) - Ricoh Aficio SP 5210DN Hardware Manual

5. Configuration
10. Enter the address, and then press the [OK] key.
Change the IP address from "11.22.33.44" to an IP address supported by your network.
11. Use the same method to assign the subnet mask and gateway address.
12. Press the [ ] or [ ] key to select [Specify], and then press the [OK] key.
5
13. Press the [Menu] key to return to the initial screen.
14. Print a configuration page to confirm the settings.
• For details about printing the configuration page, see p.44 "Test Printing".

Receiving an IP Address Automatically (DHCP)

Follow this procedure to set the printer to receive an IP address automatically using DHCP. The DHCP
feature is active by default, so this procedure is only required if you have changed the default settings.
• When [Auto-Obtain (DHCP)] is selected, you cannot configure the IP address, subnet mask, or
gateway address.
• Consult your network administrator for information about configuring network settings.
78