Supported Paper Types; Plain Paper - Ricoh Aficio SP 5210DN Hardware Manual

Supported Paper Types

The tables in this section provide details of the paper types supported by this printer. Use these tables when
specifying a tray's paper settings and take note of the information under "Note".

Plain Paper

Paper weight
Paper type setting using the
control panel
Paper type setting using the
printer driver
Supported input tray
Duplex printing
Maintenance
Note
2
60 to 90 g/m (16 to 24 lb.)
The [Menu] key > [Paper Input] > [Paper Type: (tray name)] > [No
Display (Plain Paper)] > the [OK] key
[Plain & Recycled] or [Plain (60 to 90 g/m2)]
Any input tray can be used.
Supported
• [Plain Paper 1]: 60 to 69 g/m2 (16 to 18 lb.)
• [Plain Paper 2]: 70 to 90 g/m2 (19 to 24 lb.)
Default: [Plain Paper 2]
If prints made using the paper tray show heavy smudging, use the
following procedure to change the paper type setting from the control
panel:
• Press the [Menu] key, select [Maintenance], [General Settings],
and then select [Plain Paper Setting]. Select the paper tray, and
then select [Plain Paper 1] or [Plain Paper 2].
When specifying paper thickness, remember that a higher number
indicates greater thickness. Also, because the paper thickness will
normally be detected automatically, change this setting only if a print
problem occurs.
• Tray 1: 550
• Tray 2 (Paper feed unit): 550
• Tray 3 (Paper feed unit): 550
• Tray 4 (Paper feed unit): 550
• Tray 5 (Paper feed unit): 550
• Bypass Tray: 100
Supported Paper Types
6
105