Loading Paper Onto Bypass Tray - Ricoh Aficio SP 5210DN Hardware Manual

6. Loading Paper

Loading Paper onto Bypass Tray

• Shuffle paper before loading the stack onto the tray, so multiple sheets are not fed in together.
• Set the size and direction of the loaded paper on the control panel or in the printer driver. Make sure
the settings do not conflict. Otherwise, the paper may jam or the print quality may be affected.
• Load paper with the print side up.
• During printing, do not open or close the printer covers or bypass tray, or pull out or push in the paper
tray.
1. Hold the both sides of the bypass tray and pull it toward you.
6
If you load A4 and 8
126
CEC217
1
/ " × 11" (Letter) size paper or longer, pull out the bypass tray extension.
2
CEC023