Letterhead - Ricoh Aficio SP 5210DN Hardware Manual

Paper type setting using the
control panel
Paper type setting using the
printer driver
Supported input tray
Duplex printing

Letterhead

Paper type setting using the
control panel
Paper type setting using the
printer driver
Supported input tray
Maintenance
Duplex printing
The [Menu] key > [Paper Input] > [Paper Type: (tray name)] > [Thin
Paper] > the [OK] key
[Thin (52 to 59 g/m2)]
Any input tray can be used.
Not supported
The [Menu] key > [Paper Input] > [Paper Type: (tray name)] >
[Letterhead] > the [OK] key
[Letterhead]
Any input tray can be used.
Default: [Letterhead 1]
• [Letterhead 1]
• [Letterhead 2]
• [Letterhead 3]
If prints made using the paper tray show heavy smudging, use the
following procedure to change the paper type setting from the control
panel:
• Press the [Menu] key, select [Maintenance], [General Settings],
and then select [Letterhead Setting]. Select the paper tray, and
then select [Letterhead 1], [Letterhead 2], or [Letterhead 3].
When specifying paper thickness, remember that a higher number
indicates greater thickness. Also, because the paper thickness will
normally be detected automatically, change this setting only if a print
problem occurs.
Supported
Supported Paper Types
6
107