Loading Envelopes; Loading Envelopes Onto Bypass Tray - Ricoh Aficio SP 5210DN Hardware Manual

Loading Envelopes

• The inside of the machine could be very hot. Do not touch the parts with a label indicating the
"hot surface". Otherwise, an injury might occur.
• Some of this machine's internal components get very hot. For this reason, take care when removing
misfed paper. Not doing so could result in burns.
• Check there is no air in the envelopes before loading.
• Load only one size and type of envelope at a time.
• Before loading envelopes, flatten their leading edges (the edge going into the printer) by running a
pencil or ruler across them.
• Some kinds of envelope might cause misfeeds, wrinkles or print poorly.
• Print quality on envelopes may be uneven if parts of an envelope have differing thicknesses. Print one
or two envelopes to check print quality.
• In a hot and humid environment, the envelope might be output creased or improper printing quality.

Loading Envelopes onto Bypass Tray

1. Open the rear cover.
2. Use the envelope lever.
Raising the envelope lever reduces roller pressure.
1
2
CEC046
Loading Envelopes
6
133