Snmp Setup; Settings On The Snmp Setup Page - Cisco AIR-LAP1252AG-A-K9 - Aironet 1252AG - Wireless Access Point Software Configuration Manual

Software configuration guide
Hide thumbs Also See for AIR-LAP1252AG-A-K9 - Aironet 1252AG - Wireless Access Point:
Table of Contents

Advertisement

SNMP Setup

SNMP Setup

Settings on the SNMP Setup Page

Cisco Aironet 1200 Series Access Point Software Configuration Guide
7-2
Use the SNMP Setup page to configure the access point to work with your
network's SNMP station.
Figure 7-1
SNMP Setup Page
Follow this link path to reach the SNMP Setup page:
On the Summary Status page, click Setup.
1.
On the Setup page, click SNMP in the Services section of the page.
2.
The SNMP Setup page contains the following settings:
Simple Network Management Protocol (SNMP)—Select Enabled to use
SNMP with the access point.
System Description—The system's device type and current version of
firmware.
Chapter 7
Figure 7-1
shows the SNMP Setup page.
Management System Setup
OL-2159-03

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aironet 1200 series

Table of Contents