Cisco AIR-LAP1252AG-A-K9 - Aironet 1252AG - Wireless Access Point Software Configuration Manual page 50

Filter Setup
Select forward or block from the Default Disposition pull-down menu. This
Step 6
setting is the default action for the protocols you include in the filter set. You can
override this setting for specific protocols.
In the Default Time to Live fields, enter the number of milliseconds unicast and
Step 7
multicast packets should stay in the access point's buffer before they are
discarded. These settings will be the default time-to-live values for the protocols
you include in the filter set, but you can override the settings for specific
protocols. If you leave these settings at 0, the time-to-live settings default to 3
seconds for multicast packets and 5 seconds for unicast packets.
Type the name or the ISO numeric designator for the protocol you want to add in
Step 8
the Special Cases entry field and click Add New. For example, to add Telnet to an
IP port filter set, type telnet or 23.
The Protocol Filter Set page appears.
page.
Figure 3-7
Select forward or block from the Disposition pull-down menu to forward or
Step 9
block the protocol traffic, or leave this setting at default to use the default
disposition that you selected for the filter set in
Select a priority for the protocol from the Priority pull-down menu. The menu
Step 10
includes the following options:
•
Cisco Aironet 1200 Series Access Point Software Configuration Guide
3-12
Protocol Filter Set Page
background—Use this setting for bulk transfers and other activities that are
allowed on the network but should not impact network use by other users and
applications.
Chapter 3
Figure 3-7 shows the Protocol Filter Set
Step 6.
Configuration
OL-2159-03