Chapter 3
Configuration
Creating a MAC Address Filter
Step 1
Step 2
OL-2159-03
Figure 3-8
Address Filters Page
Follow this link path to reach the Address Filters page:
On the Summary Status page, click Setup.
1.
On the Setup page, click Address Filters under Associations.
2.
Follow these steps to create a MAC address filter:
Follow the link path to the Address Filters page.
Type a destination MAC address in the New MAC Address Filter: Dest MAC
Address field. You can type the address with colons separating the character pairs
(00:40:96:12:34:56, for example) or without any intervening characters
(004096123456, for example).
Cisco Aironet 1200 Series Access Point Software Configuration Guide
Filter Setup
3-15