Setting Up WEP
Figure 4-6
Follow this link path to reach the AP Radio Data Encryption page:
1.
2.
3.
Follow these steps to set up WEP keys and enable WEP:
Follow the link path to the AP Radio Data Encryption page.
Step 1
Before you can enable WEP, you must enter a WEP key in at least one of the
Step 2
Encryption Key fields.
Cisco Aironet 1200 Series Access Point Software Configuration Guide
4-10
AP Radio Data Encryption Page
On the Summary Status page, click Setup.
On the Setup page, click Security.
On the Security Setup page, click Radio Data Encryption (WEP) for the
internal radio or the radio module.
Chapter 4
Security Setup
OL-2159-03