Selective Update Of The Firmware Components - Cisco AIR-LAP1252AG-A-K9 - Aironet 1252AG - Wireless Access Point Software Configuration Manual

Updating Firmware

Selective Update of the Firmware Components

Step 1
Step 2
Cisco Aironet 1200 Series Access Point Software Configuration Guide
6-4
To update firmware components individually, click Through Browser on the
Selectively Update Firmware line on the Cisco Services Setup page. The Update
Firmware Through Browser page appears.
Through Browser page.
Figure 6-3 Update Firmware Through Browser Page
Follow these steps to update one of the firmware components through the browser:
If you know the exact path and filename of the new firmware component, type it
in the New File for [component] entry field.
If you aren't sure of the exact path to the new component, click Browse... next to
the component's New File entry field. When the File Upload window appears, go
to the directory that contains the component and select the file. Click Open.
When the filename for the new component appears in the New File entry field,
click Browser Update Now to load and install the new component. When the
update is complete, the AP automatically reboots.
Chapter 6 Managing Firmware and Configurations
Figure 6-3 shows the Update Firmware
OL-2159-03