Updating From A File Server; Full Update Of The Firmware Components - Cisco AIR-LAP1252AG-A-K9 - Aironet 1252AG - Wireless Access Point Software Configuration Manual

Chapter 6 Managing Firmware and Configurations

Updating from a File Server

Full Update of the Firmware Components

Step 1
OL-2159-03
When you update the firmware from a file server, you load new firmware through
FTP or TFTP from a file server. You can update the four firmware
components—the management system firmware, the firmware web pages, and the
radio firmware for both radios—individually or all at once. It is simplest to update
all the components at once, but in some situations you might want to update them
individually.
To update all the firmware components at the same time, click From File Server
on the Fully Update Firmware line on the Cisco Services Setup page. The Update
All Firmware From File Server page appears.
Firmware From File Server page.
Figure 6-4 Update All Firmware From File Server Page
Follow these steps to update all three firmware components from a file server:
Click the File Server Setup link to enter the FTP settings. The FTP Setup page
appears. Figure 6-5 shows the FTP Setup page.
Cisco Aironet 1200 Series Access Point Software Configuration Guide
Updating Firmware
Figure 6-4 shows the Update All
6-5