Optical Drive; Rear Panel Controls, Ports, And Leds - HP Integrity rx2800 - i2 User's & Service Manual

Figure 9 hot plug SAS disk drive LEDs
Drive activity LED
1
Table 6 SAS disk drive LEDs
Drive activity LED status
On, off, or flashing
On, off, or flashing
On
On
Flashing regularly (1 Hz)
Flashing regularly (1 Hz)
Flashing irregularly
Flashing irregularly
Off
Off
Off

Optical drive

The server has one SATA DVD+RW drive. This device has one activity LED.

Rear panel controls, ports, and LEDs

The server rear panel includes communication ports, I/O ports, USB ports, ac power connectors,
and the locator LED and button. LEDs located on the rear panel of the server signal the operational
status of the rear panel components.
Drive status LED
2
Drive status LED status Indication
Alternating amber and The drive has failed, or a predictive failure alert has been
blue received for this drive; it also has been selected by a
management application.
Blue The drive is operating normally, and it has been selected
by a management application.
Regularly flashing amber A predictive failure alert has been received for this drive.
(1 Hz)
IMPORTANT:
Off The drive is online, but it is not active currently.
Regularly flashing amber
CAUTION:
(1 Hz)
may terminate the current operation and cause data loss.
The drive is part of an array that is undergoing capacity
expansion or stripe migration, but a predictive failure alert
has been received for this drive. To minimize the risk of data
loss, do not replace the drive until the expansion or
migration is complete.
Off
CAUTION:
may terminate the current operation and cause data loss.
The drive is rebuilding, erasing, or it is part of an array that
is undergoing capacity expansion or stripe migration.
Regularly flashing amber The drive is active, but a predictive failure alert has been
(1 Hz) received for this drive. Replace the drive as soon as possible.
Off The drive is active, and it is operating normally.
Amber A critical fault condition has been identified for this drive,
and the controller has placed it offline. Replace the drive as
soon as possible.
Regularly flashing amber A predictive failure alert has been received for this drive.
(1 Hz) Replace the drive as soon as possible.
Off The drive is offline, a spare, or not configured as part of an
array.
Replace the drive as soon as possible.
Do not remove the drive. Removing a drive
Do not remove the drive. Removing a drive
Controls, ports, and LEDs 19