HP Integrity rx2800 - i2 User's & Service Manual page 43

7. Secure the heat sink to the CPU:
a. Slide both plastic locking tabs into place (see callout 1 in the image below).
b. Flip the latch down (see callout 2 in the image below).
WARNING!
on top of the lever during installation to avoid personal injury.
CAUTION:
the CPU module from the CPU's heat sink after they have been coupled.
8. Route and connect the power cord.
The heat sink locking lever can constitute a pinch hazard. Keep your hands
To prevent thermal instability and damage to the server, do not separate
Installing additional components 43