Table of Contents
Advertisement
v 3.5-inch drive models: Remove the hard disk drive backplane or back plate from the cage. See
"Replacing the SAS/SATA hard disk drive back plate or backplane" on page 72 for instructions.
6. Remove the screws that hold the drive cage in place.
7. Slide the drive cage forward and remove it from the server.
8. If you are instructed to return the drive cage, follow all packaging instructions, and use any
packaging materials for shipping that are supplied to you.
Installing a drive cage
The following illustration shows installing a simple-swap 3.5-inch drive cage.
The following illustration shows installing a hot-swap 3.5-inch drive cage.
Chapter 6. Replacing CRUs and FRUs
57
Advertisement
Table of Contents
