Table of Contents
Advertisement
9. Go to "Completing the installation" on page 47.
Replacing the virtual media key
To replace the virtual media key, complete the following procedures:
Removing the virtual media key
To remove the virtual media key, complete the following steps:
1. Read the safety information in "Safety" on page vii and "Installation guidelines" on page 25.
2. Turn off the server and peripheral devices and disconnect all power cords; then, remove the cover
(see "Removing and installing the cover" on page 29).
3. Grasp the virtual media key 4 and gently slide it up and off of the mounting tab 2 .
Microprocessor
Heatsink
Orientation
DIMMs
DIMMs
4. If you are instructed to return the virtual media key, follow all packaging instructions, and use any
packaging materials for shipping that are supplied to you.
Installing the virtual media key
To install the virtual media key, complete the following steps:
1. Read the safety information in "Safety" on page vii and "Installation guidelines" on page 25.
2. Remove the cover (see "Removing and installing the cover" on page 29).
3. Align the virtual media key 4 with the mounting tab 2 and 1 ; then slide it down the tab onto
the connector 3 on the system board. Press the virtual media key down into the connector until it is
firmly seated on the system board.
82
ThinkServer RS210, Types 6531, 6532, 6533, and 6534: Installation and User Guide
Advertisement
Table of Contents
