Table of Contents
Advertisement
Note: When using the remote LAN access method to access IMM using the LAN from a client, the
host and the imm_external_ip address are required parameters.
host <imm_external_ip> [user <imm_user_id>[[password <imm_password>]
Where:
imm_external_ip
The external IMM LAN IP address. There is no default value. This parameter is required.
imm_user_id
The IMM account (1 of 12 accounts). The default value is USERID.
imm_password
The IMM account password (1 of 12 accounts). The default value is PASSW0RD (with a
zero 0 not an O).
The following commands are examples of using the user ID and password default values and not
using the default values:
Example that does not use the user ID and password default values:
asu set SYSTEM_PROD_DATA.SYsInfoUUID <uuid_value> host <imm_ip>
user <user_id> password <password>
Example that does use the userid and password default values:
asu set SYSTEM_PROD_DATA.SysInfoUUID <uuid_value> host <imm_ip>
5. Restart the server.
Updating the DMI/SMBIOS data
The Desktop Management Interface (DMI) must be updated when the system board is replaced. Use the
Advanced Settings Utility to update the DMI in the UEFI-based server. The ASU is an online tool that
supports several operating systems. Make sure that you download the version for your operating system.
To download the ASU and update the DMI, complete the following steps.
1.
Download the Advanced Settings Utility (ASU):
a. Go to: http://www.lenovo.com/support.
b. From the Select your product list, select Servers and Storage.
c. In the Browse by product window Family: list, select ThinkServer RS210.
d. Click Downloads and drivers to link to the ASU program.
2. ASU sets the DMI in the Integrated Management Module (IMM). Select one of the following methods
to access the Integrated Management Module (IMM) to set the DMI:
v Online from the target system (LAN or keyboard console style (KCS) access)
v Remote access to the target system (LAN based)
3. Copy and unpack the ASU package, which also includes other required files, to the server. Make sure
that you unpack the ASU and the required files to the same directory. In addition to the application
executable (asu or asu64), the following files are required:
v For Windows based operating systems:
– ibm_rndis_server_os.inf
– device.cat
v For Linux based operating systems:
– cdc_interface.sh
4. After you install ASU, Type the following commands to set the DMI:
asu set SYSTEM_PROD_DATA.SysInfoProdName <m/t_model> [access_method]
asu set SYSTEM_PROD_DATA.SysInfoSerialNum <s/n> [access_method]
asu set SYSTEM_PROD_DATA.SysEncloseAssetTag <asset_tag> [access_method]
86
ThinkServer RS210, Types 6531, 6532, 6533, and 6534: Installation and User Guide
Advertisement
Table of Contents
