Lenovo 653417U Installation And User Manual page 72

The following illustration shows removing a hot-swap 2.5-inch drive cage.
To remove a drive cage, complete the following steps:
1. Read the safety information in "Safety" on page vii and "Installation guidelines" on page 25.
2. Turn off the server and peripheral devices, and disconnect the power cord and all external cables.
3. Remove the hard disk drives from the cage (see "Removing and installing hard disk drives" on page
38.
4. Remove the cover (see "Removing and installing the cover" on page 29).
Attention: To ensure proper cooling and airflow, do not operate the server for more than 30 minutes
with the cover removed.
5. Remove the hard disk drive backplane or back plate:
v 2.5-inch drive models: Remove the hard disk drive backplane from the cage. See "Replacing the
SAS/SATA hard disk drive back plate or backplane" on page 72 for instructions.
56
ThinkServer RS210, Types 6531, 6532, 6533, and 6534: Installation and User Guide