Table of Contents
Advertisement
A video of this procedure is available at YouTube:
AU3iY3F7lq3qfqr5caGbIu
Procedure
Step 1.
Place the CMOS battery on top of the socket with the positive (+) symbol facing up, and press the
battery into the seat until it clicks in place.
Figure 31. Installing the CMOS battery
After you finish
1. Reset date, time, and all the passwords.
2. Proceed to complete the parts replacement, see
Drive and drive cage replacement
Follow this procedure to remove and install a drive or a drive cage.
Drive bay locations
See the following illustration for the locations of drive bays and the types of drives supported.
Figure 32. Drive bay locations
.
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
"Complete the parts replacement" on page
.
Chapter 3
Hardware replacement procedures
158.
49
Advertisement
Table of Contents
