Table of Contents
Advertisement
Chapter 7. Configuring the server
The following configuration programs come with the server:
v Setup Utility program
The Setup Utility program is part of the UEFI. Use it to configure serial port assignments, change
interrupt request (IRQ) settings, change the startup-device sequence, set the date and time, and set
passwords.
v Boot Manager program
The Boot Manager program is part of the server firmware. Use it to override the startup sequence that
is set in the Setup Utility and temporarily assign a device to be first in the startup sequence.
v ThinkServer EasyStartup program
This program simplifies the process of configuring your RAID controllers and installing your operating
system. It is on the ThinkServer EasyStartup DVD provided with your server. For details, see "Using the
EasyStartup DVD" on page 100.
v Integrated Management Module
Use the integrated management module (IMM) for configuration, to update the firmware and sensor
data record/field replaceable unit (SDR/FRU) data, and to remotely manage a network.
v ThinkServer EasyManage products
ThinkServer EasyManage Core Server and ThinkServer EasyManage Agent work together to provide
centralized hardware and software inventory management and secure automated system management
through a single console. See "Installing ThinkServer EasyManage software" on page 106.
v Remote presence capability and blue-screen capture
The remote presence and blue-screen capture feature are integrated into the Integrated Management
Module (IMM). The virtual media key is required to enable the remote presence functions. When the
optional virtual media key is installed in the server, it activates the remote presence functions. Without
the virtual media key, you will not be able to access the network remotely to mount or unmount drives
or images on the client system. However, you will still be able to access the Web interface without the
virtual media key. You can order the optional IBM Virtual Media Key, if one did not come with your
server. For more information about how to enable the remote presence function, see "Using the remote
presence capability and blue-screen capture" on page 108.
v LSI Configuration Utility program
Use the LSI Configuration Utility program to configure the integrated SAS/SATA controller with RAID
capabilities and the devices that are attached to it. For information about using this program, see
"Using LSI Configuration Utility program" on page 96.
v Ethernet controller configuration
For information about configuring the Ethernet controller, see "Configuring the Gigabit Ethernet
controllers" on page 110.
v IBM Advanced Settings Utility (ASU) program
Use this program as an alternative to the Setup utility for modifying UEFI settings and IMM settings.
Use the ASU program online or out of band to modify UEFI settings from the command line without
the need to restart the server to access the Setup utility.
© Lenovo 2008, 2009. Portions © IBM Corp. 2007, 2009.
89
Advertisement
Table of Contents
