Table of Contents
Advertisement
The following illustration shows cable routing for the DVD cable.
Note: Route the DVD cable 2 through the fan cage hole on the left of fan 1.
5. Connect the DVD cable to the system board connector 1 .
6. Reconnect the DVD power cable to the power supply cable.
7. Reinstall the DVD drive (see "Removing and installing an optional DVD drive" on page 45).
8. Reinstall the riser-card assembly (see "Installing the riser-card assembly" on page 76).
Chapter 6. Replacing CRUs and FRUs
81
Advertisement
Table of Contents
