Figure 105: Installing An Fpc In An M40E Router - Juniper M40E Hardware Manual

Copyright © 2010, Juniper Networks, Inc.
Press and hold the FPC offline button until the green
lights steadily, in about 5 seconds. The LEDs and offline button for each FPC are
located directly above it on the craft interface.
Issue the CLI command:
user@host>request chassis fpc slot slot-number online
For more information about the command, see the Junos OS System Basics and
Services Command Reference.
CAUTION: After the
removing the FPC again, removing an FPC from a different slot, or inserting
an FPC in a different slot.
You can also verify correct FPC and PIC functioning by issuing the
show chassis fpc pic-status
and "Maintaining M40e PICs and PIC Cables" on page 139.

Figure 105: Installing an FPC in an M40e Router

Chapter 16: Replacing M40e Hardware Components
OK LED lights steadily, wait at least 30 seconds before
commands described in"Maintaining M40e FPCs" on page 132
LED next to the button
OK
show chassis fpc and
195