M40E Chassis Lifting Guidelines; Series Routers - Juniper M40E Hardware Manual

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Appendix A: Safety and Regulatory Compliance Information for the M40e Router

M40e Chassis Lifting Guidelines

The weight of a fully configured chassis is about 360 lb (164 kg). Observe these guidelines
for lifting and moving the router:
Before moving the router, read the guidelines in"M40e Site Preparation Checklist" on
page 67 to verify that the intended site meets the specified power, environmental, and
clearance requirements.
Do not attempt to lift a fully configured router by yourself. Using a mechanical lift to
maneuver the router into a rack is recommended. If a lift cannot be used, a minimum
of three people must lift the router, and you must remove components from the chassis
before lifting.
Before lifting or moving the router, disconnect all external cables.
As when lifting any heavy object, lift most of the weight with your legs rather than your
back. Keep your knees bent and your back relatively straight and avoid twisting your
body as you lift. Balance the load evenly and be sure that your footing is solid.
Installing the M40e Chassis into the Rack on page 95
Installing the M40e Router Using a Mechanical Lift on page 81
Removing Components from the Chassis Before Installing the M40e Router Without
a Lift on page 83
Installation Instructions Power Warning for M Series, MX Series, and T Series Routers
on page 235
Rack-Mounting Requirements and Warnings for M Series, MX Series, and T Series
Routers on page 236
Ramp Warning for M Series, MX Series, and T Series Routers on page 240
Installation Instructions Power Warning for M Series, MX Series, and T Series
Routers
WARNING: Read the installation instructions before you connect the router
to a power source.
Waarschuwing Raadpleeg de installatie-aanwijzingen voordat u het systeem
met de voeding verbindt.
Varoitus Lue asennusohjeet ennen järjestelmän yhdistämistä virtalähteeseen.
Attention Avant de brancher le système sur la source d'alimentation, consulter
les directives d'installation.
Warnung Lesen Sie die Installationsanweisungen, bevor Sie das System an
die Stromquelle anschließen.
235