Table 29: M40E Ac Power Cord Specifications - Juniper M40E Hardware Manual

M40e Multiservice Edge Router Hardware Guide
278
WARNING: The AC power cord for the router is intended for use with the
router only and not for any other use.
WARNING:
Translation from Japanese: The attached power cable is only for this product.
Do not use the cable for another product.
NOTE: In North America, AC power cords must not exceed 4.5 m
(approximately 14.75 ft) in length, to comply with National Electrical Code
(NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52, and Canadian Electrical
Code (CEC) Section 4-010(3). The cords supplied with the router are in
compliance.
Table 29 on page 278 provides specifications and Figure 129 on page 279 depicts the plug
on the AC power cord provided for each country or region.

Table 29: M40e AC Power Cord Specifications

Country
Australia
China
Europe (except Italy and United Kingdom)
Italy
North America
United Kingdom
Electrical Specification
240 VAC, 50 Hz AC
220 VAC, 50 Hz AC
220 or 230 VAC, 50 Hz AC
230 VAC, 50 Hz AC
208 VAC, 60 Hz AC
240 VAC, 50 Hz AC
Copyright © 2010, Juniper Networks, Inc.
Plug Type
SAA/3
CH2-16P
CEE 7/7
CEI 23-16
NEMA L6-20P
BS89/13