Replacing The M40E Packet Forwarding Engine Components; Figure 103: Installing A Routing Engine In An M40E Router - Juniper M40E Hardware Manual

M40e Multiservice Edge Router Hardware Guide
Related
Documentation

Replacing the M40e Packet Forwarding Engine Components

190
You can also verify correct Routing Engine functioning by issuing the
show chassis routing-engine
Module Components" on page 131.
Reinstall the rear component cover and tighten the thumbscrew at each corner to
7.
secure it to the chassis. For complete instructions, see "Reinstalling the M40e
Components into the Chassis" on page 97.
CAUTION: To maintain proper airflow and provide electromagnetic
shielding, do not operate the router without the rear component cover in
place.

Figure 103: Installing a Routing Engine in an M40e Router

M40e Field-Replaceable Units (FRUs) on page 157
Tools and Parts Required to Remove Components from an M40e Router on page 309
M40e Routing Engine Description on page 26
Routing Engine Interface Cable and Wire Specifications for the M40e Router on page 288
For instructions on replacing Packet Forwarding Engine components, see:
Replacing an FPC in an M40e Router on page 191
Replacing a PCG in an M40e Router on page 196
Replacing a PIC in an M40e Router on page 198
Replacing PIC Cables in an M40e Router on page 203
command described in "Maintaining the M40e Host
Copyright © 2010, Juniper Networks, Inc.